產品中心
分享到:
壓力噴霧干燥機

壓力噴霧干燥機

噴霧干燥物料咨詢單
Spray-drying material advisory single
Customer Name and Address
(客戶名稱) :__________________________________________
(地址) :___________________________________________________________________________
Telephone(電話)15957324153   E-mail(郵箱)______________Telefax( 傳真)____  
Location of Plant(廠址)______________________________________________________
1.  MATERIAL TO BE DRIED(干燥物料)
     Name(名稱)                   ____________________________________
     Chemical composition(化學成分) _______________________________________
                                      
2.  PRODUCT CAPACITY(產品處理能力)
      Output of dried product, kg per hour
     (干燥產品產量,千克 / 每小時)  
      Operating hours per year/ week/ day
     (操作時間 小時 / 每年/每周/每天)  _______________________________
3.   FEED(進料)
       Feed type (cake, emulsion, paste,
       solution, suspension, moist solids)
       進料狀態(餅狀,乳化狀,膏狀,溶液,
       懸浮液):  __________________________________________________________
       Is material pumpable?
       此物質是否可以用泵輸送?Viscosity (粘度) 0.1~1.0 Pa•s  at (溫度) :   。
       Is material abrasive?
       此物質是否具有磨蝕性?_______________________________
       Solids content in feed, % on total basis
       進料含固量,重量比%: _______________________________
       Maximum temperature of feed with no
       product deterioration, ℃
   可容許無損壞產品的高進料溫度℃: _______________________________
4.    END PRODUCT (后產品)
       Moisture % on total basis (method of analysis)
       余水量%(計算方法)     _______________________________________
       Max. dry product temperature, ℃
       可容許高產品溫度℃: _______________________________
       Desired mean particle size, microns
       (method of analysis)
       要求平均顆粒大小,微米(分析方法): _______________________________
Desired particle form (agglomerate, granulate,
       powder)
       要求產品顆粒形態(附聚,顆粒,粉末): _______________________________
       Desired bulk density, kg/m3
       要求產品堆密度,千克/每立 : _______________________________
5.    MATERIALS OF CONSTRUCTION(制造材料)
       Parts in contact with feed(與進料接觸部分): _______________________________
       Parts in contact with dry product (與產品接觸部分)     ___________________________________
6.    HEATING(加熱)
我們準備采用天然氣加熱方式:
 Gas(Natural gas, City gas ,Water Coal gas)(天然氣,城市煤氣,水煤氣)
       Pressure at plant, bar (abs.)                   Net calorific value, kJ/Nm3
       壓力巴(絕壓) ___________________________熱值,大卡/立方米____關于加熱這一點可滿足產要求!______________ _
8.     LOCAL CONDITIONS(當地氣候條件)
         Winter (冬天)平均氣溫____5_____℃ Relative humidity(相對濕度)_
         Summer(夏天)平均氣溫 ____℃  Relative humidity(相對濕度):  _ 
         Altitude, m above sea level海拔 (米): _________________________________
9.     ENVIRONMENTAL RESTRICTIONS(環保要求)
         Max. solids emission in exhaust air, mg/Nm3
         高廢氣含塵量,毫克/立方米            _______________________________________
         Max. noise level at given distance dBA, 1m
         大噪音限制(一米處,dBA): _____________________________________
 
10.    PRESENT PRODUCTION(生產現狀)
          Existing drying equipment, type (目前干燥設備種類)_ ______________ _____
          Pretreatment of feed (進料預處理設備)    _______________ _______
          After treatment of dried product
          干燥后產品的后加工設備         ____________________________________
          Application of dried product干燥產品的應用     _____________________________________
11.     ASPECTS OF HEALTH AND SAFETY 健康安全方面
          Will the product processed on Niro plant be used
          for human consumption?
          經尼魯設備加工的產品是否用于人們日常消耗?                         ______________________________________
          Is it possible that the product, as particles
          suspended in air, can form an explosive or
          flammable mixture?
          該產品顆粒懸浮在空氣中是否可能爆炸或易燃? _____________________________________
          Is the product considered hazardous, because it is  該產品是否有如下因素認為是危險品?
          Toxic (有毒)                           _____________________________________
          Carcinogenic(致癌)                  __ ____________________________________
          Mutagenic(誘變)                      ___________________________________
          Corrosive(腐蝕性)                    ______________________________________
          Irritant(刺激性)                 _ ______________________________________
          Oxidant(氧化劑)                      ____________________________________
          Unstable (reactive)不穩定性               ___________________________________
          Water reactive(與水反應)         __________________________________
          Pyrophoric(自燃性)  __________________________________
12.    MATERIAL SAFETY DATE SHEET (MSDS) 材料安全數據表
          Is customer’s sheet available? (客戶是否提供此表格)Yes 是□   No 不□
          If so please attach. (如果是的話,請附上)
   
Date (日期)_ __________________________   Name (姓名) 
 
Title (職稱)_ _____________________________       Signature (簽名)
天陽干燥手機網
點擊下載或掃描
99riAV国产精品视频一区|老鸭窝一区二区三区四区|99久久精品免费看|鲁人人人鲁人人鲁精品